Rocan PureKleen SN – Efflorescence Remover

Specialist Cleaning Efflorescence Remover for concrete and stone
Efflorescence Remover before and after
Specialist Cleaning Efflorescence Remover for concrete and stone
Efflorescence Remover before and after

Rocan PureKleen SN – Efflorescence Remover

85.75

5 Litres

Rocan PureKleen SN is a highly effective salt neutraliser for concrete and stone.

Quantity:
Add To Cart

Key Facts:

  • Efficient in removing cement, concrete and mineral deposits by de-structuring cement and mineral deposits on all substrates.

  • Far less hazardous than citric, hydrochloric and phosphoric acid based products.

  • Formulated as a consequence of increasing demands put on users in terms of safety, compliance, impact on the environment and sustaining treated substrates. Indeed, unlike traditional acid products.

  • Not classified as corrosive and is biodegradable and totally inert to all surfaces (does not damage glass, metal and plastic, and is non- corrosive).

  • Capable of removing cement, concrete and mineral deposits on fragile substrates such as metal (including steel and aluminium), glass, rubber and gloss paints, without changing their appearance.

  • Ideal for mineral substrates and does not change the surface porosity.

Advantages and Characteristics:

  • No neutralisation on required.

  • Over 90% biodegradable.

  • Risk-free for the user & environment.

  • Suitable for all surfaces: metal, glass, rubber, paints, etc…

  • Powerful remover and fast acting.

  • Non-corrosive; non-irritant & water-borne.

  • Suitable for floors & walls.

  • Exterior & interior use.

  • Easy & quick to use.

  • Comes as a concentrate. Add water as follows depending on degree of contamination: 1:1 heavy; 1:5 medium; 1:10 light.

Instructions for Application of Rocan PureKleen SN:

“Always test apply on a small hidden portion of the substrate”

  • Always test apply on a small hidden portion of the substrate before applying.

  • PureKleen-SN is a concentrate and requires water to be added as appropriate.

  • Shake the container well before use.

  • Apply using a low pressure hand spray unit or brush.

  • Allow the product act for 5 to 30 minutes (the time required varies depending on the size of the laitance and the thickness of the material deposits being re- moved).

  • Rinse the entire substrate with a high pressure washer once the material deposits have softened. Otherwise, brush on using a thick bristle broom, and then rinse with water from a hosepipe whilst brushing at the same me.

  • Avoid allowing the product to dry prior to rinsing.

  • To prevent future soiling, it is recommended to use Rocan PureScape

For more information or if you have any questions – don’t hesitate to call our order hotline!


Before/After

purekleen sn